وظائف شاغرة في الملكية الأردنية… برواتب تنافسية تصل إلى 700 دينار

25/12/2023

3 دقائق

اعلان توظيف عاجل في الملكية الأردنية: رواتب تنافسية تصل إلى 700 دينار للمرشحين المناسبين – قم بتقديم طلبك الآن!

تابع المقال للآخر لتصفح جميع الوظائف المتاحة لدى الملكية الأردنية

Job Description

About the job

Aircraft mechanics are personnel authorized to carry out maintenance tasks on an aircraft to any standard specified in the aircraft maintenance data under the supervision of the certifying staff and notify aircraft supervisors of defects or mistakes requiring rectification to re-establish required maintenance standards. Key accountabilities comprise the following:

Assist the certifying staff during the performance of maintenance
Report to the certifying staff any present defect on the aircraft
Perform scheduled and unscheduled maintenance checks and aircraft servicing tasks.

Duties & Responsibilities:

Perform the maintenance, preventive maintenance, and alteration (repair or modification) that his supervisor (CS) is authorized to perform when the supervisor personally observes the work being done to the extent necessary to ensure that it is being done properly and when the supervisor is readily available in person for consultation.
Perform scheduled and unscheduled maintenance checks (i.e. inspections and checks) on an aircraft under the supervision of an authorized certifying staff
Carry out maintenance tasks to any standard specified in the maintenance data under the supervision of the aircraft certifying staff (aircraft supervisor)
Notify supervisors of defects or mistakes requiring rectification to re-establish required maintenance standards
Perform aircraft towing and pushback including ground to cockpit communication during these ground operations
Replenish (fuel system, hydraulic fluids, oil, gas, water, toilet sanitary fluid, rain repellant), scheduled servicing (cleaning, lubrication, drainage) and unscheduled servicing operations (aircraft protection, sampling for analysis and system line flushing) applicable to the aircraft
Handle Aircraft at arrival and at departure (i.e. placing cones, placing wheel chocks, external walk around and ground to cockpit communication)
Adhere to the safety precautions and warnings as directed by the aircraft/component/material manufacturer when being involved in aircraft maintenance and the organization’s safety policy in general while on duty
Use the proper tools during maintenance as prescribed in the instructions for continued airworthiness (TSM, AMM, SBs… etc.) and maintain the serviceability of tools in his/her possession
Control the tools in his/her custody during the performance of maintenance including location, quantity, content and serviceability prior to use
Draw from technical stores the required tools/materials/components required in the performance of maintenance as directed by the aircraft certifying staff (aircraft supervisor)
Return items used in the performance of maintenance including tools, equipment, components and materials to store in normal condition. If damaged during maintenance or found damaged, inform shift supervisor and store custodian immediately
Dispose expendable items in the designated areas In Accordance With (IAW) health and safety regulations wherever applicable
Obtain and use the applicable instructions for the “on-aircraft maintenance” necessary to ensure continued airworthiness of the aircraft (i.e. AMM, IPC, TSM, FIM… etc.)
Comprehend the task to be undertaken prior to commencing any maintenance on the aircraft
Demonstrate best standard practices in the performance of maintenance
Wear the provided safety gear and as instructed in the technical data during the performance of maintenance

Skills

Knowledge & Skills Required:

Comprehensive knowledge of relevant parts of operational requirements and procedures
Knowledge of quality systems
Knowledge of aviation legislation and Human Factors
Ability to read, write and communicate to an understandable level in English

Qualifications: